Audison Prima APBX 8 R 8" Loaded Subwoofer
Audison Prima APBX 8 R 8" Loaded Subwoofer

Audison Prima APBX 8 R 8" Loaded Subwoofer

SKU: APBX8R

The Audison Prima APBX 8 R loaded enclosure was developed with reflex loading, with tuning designed to concentrate SPL in the lowest frequency range. The aim was to exploit the natural boost in output found in most cars below 60 Hz known as cabin gain.

Price:
$469.99
In-Store Exclusive

Frequently Asked Questions

In addition to shipping all over Australia with Australia Post, we also offer in-store pickup from our Bankstown, NSW store. From the checkout, you're able to select between shipping methods, regular, Express, or In-Store Pickup. For more information on Bankstown Sound shipping, please read more here.
We offer installation services for everything we sell. Our installations come with a lifetime warranty and are performed at our Bankstown, NSW workshop by Car Audio installation specialists with over 25+ years experience. Please contact us for an installation quote if you're wanting us to do it for you.
A back order occurs when an item is temporarily out of stock but can still be ordered. This means we’ll reserve the item for you and ship it as soon as it’s available again. By placing a back order, you’ll be first in line to receive the product once it’s restocked, ensuring you don’t miss out.

More about the product

8" Loaded Subwoofer

The Audison Prima APBX 8 R loaded enclosure was developed with reflex loading, with tuning designed to concentrate SPL in the lowest frequency range. The aim was to exploit the natural boost in output found in most cars below 60 Hz known as cabin gain. The 8-inch single 4 ohm voice-coil subwoofer has a powerful motor that maximizes efficiency in combination with the AP8.9 bit amplifier. The low-resonant frequency of the subwoofer, matched to the reflex enclosure keeps excursion low within the entire audio spectrum, allowing also the use with a pair of AP4.9 bit / AP4 D bridged channels, capable of delivering 260 W rms.

Features:

  • Ultra-low profile (5.16 in. / 131 mm) box with slot-ported design perfectly tuned to fully exploit the APS 8 R driver.
  • 2S² (2 Sides/2 Sounds) design provides the ability to choose between Down-Firing mounting to increase the low-frequency extension and Up-Firing install to obtain more punch and definition.
  • Levelling feet with velcro inserts included for a secure grip with the carpet while maintaining easy removal.
  • SSP (Sub Smart Plug) features both traditional push contacts and a Plug-&-Play terminal block to easily configure the impedance as required and provides a quick release.
  • Rounded corners allow easy positioning in the trunk and act as reinforcement to reduce enclosure resonance.
  • Special designed cone-dustcap-basket geometry which guarantees a long linear excursion capability (9 mm, one-way).
  • Massive driver motor assembly, optimized with FEM (Finite Element Modeling) for perfect control under high excursion conditions.
  • Water-repellent pressed paper 8 in. cone, featuring a profile developed with FEM and optimized with the Klippel Scan Vibrometer.
  • Specifically developed to be combined with either the AP8.9 bit (2 CH bridged) or AP4.9 bit /AP4 D (2 CH bridged) amplifiers taking advantage of the bass boost feature and integrated parametric equalizer of the built-in DSP.
  • Sturdy metal grid included for a total protection of the subwoofer driver.

Specifications:

  • Size: 200 mm
  • Power Handling - Peak: 500 W
  • Power Handling - Continuous: 250 W
  • Magnet Material: HIGH DENSITY FLUX FERRITE
  • Cone Material: COTTON-FIBRE PRESSES PAPER CONE

Look out for Bankstown Sound Recommendations

Whether you're shopping in store or online, we're here to guide you with honest, expert advice. Keep an eye out for our 'Bankstown Sound Recommends' callouts across product pages for real insights into the gear we trust and use ourselves, from the Bankstown Sound team.

Related Products

Why Choose Bankstown Sound for Your Car Audio & Tech Upgrades

At our Bankstown Sound store and workshop in Sydney, our team ensures every car and auto audio installation and upgrade starts with an understanding of how you use your car. Our team works with you to understand your driving habits, the features you rely on, and the problems you’re trying to solve.

Most factory setups are built to broad standards and often lack the clarity or seamless connectivity required for how people actually drive. That’s why we focus on modernising your dashboard and audio performance based on how you use your vehicle.