Audison Prima APS 8 R 8" Subwoofer
Audison Prima APS 8 R 8" Subwoofer

Audison Prima APS 8 R 8" Subwoofer

SKU: APS8R

With the aim of providing high acoustical output even when used with lower power, the Audison Prima APS 8 R was designed for use in an 8.5-litres reflex enclosure, with tuning between 30 and 40Hz.

Price:
$304.99
In-Store Exclusive

Frequently Asked Questions

In addition to shipping all over Australia with Australia Post, we also offer in-store pickup from our Bankstown, NSW store. From the checkout, you're able to select between shipping methods, regular, Express, or In-Store Pickup. For more information on Bankstown Sound shipping, please read more here.
We offer installation services for everything we sell. Our installations come with a lifetime warranty and are performed at our Bankstown, NSW workshop by Car Audio installation specialists with over 25+ years experience. Please contact us for an installation quote if you're wanting us to do it for you.
A back order occurs when an item is temporarily out of stock but can still be ordered. This means we’ll reserve the item for you and ship it as soon as it’s available again. By placing a back order, you’ll be first in line to receive the product once it’s restocked, ensuring you don’t miss out.

More about the product

8" Subwoofer

With the aim of providing high acoustical output even when used with lower power, the Audison Prima APS 8 R was designed for use in an 8.5-litres reflex enclosure, with tuning between 30 and 40Hz. The APS 8 R has been specifically developed to be combined with either the AP8.9 bit or AP4.9 bit / AP4 D. Prima subwoofer components have been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However reduced mounting depth traditionally has meant low excursion.

Prima subwoofers employ a special cone-dustcap-basket geometry which guarantees large excursion of the mobile group, while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the rocking-mode phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom-plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth.

Features:

  • Ultra-low profile (3.11 in. / 79 mm) for maximum installation flexibility.
  • Designed to deliver maximum performance in a reflex enclosure starting from 8.5 lt.
  • Special designed cone-dustcap-basket geometry which guarantees a long linear excursion capability (almost 9 mm, one-way) while keeping the mounting depth to minimum.
  • Air vents on the basket underneath the spider, eliminating the need for the central pole vent allowing mounting close to rear wall of enclosure.
  • Massive motor assembly optimized with FEM (Finite Element Modeling) for perfect control under high excursion conditions.
  • Water-repellent pressed paper 8 in. cone featuring a profile developed with FEM simulation and optimized with the Klippel Scan Vibrometer.
  • Specifically developed to be combined with either the Audison AP8.9 bit (2 CH bridged) or AP4.9 bit /AP4 D (2 CH bridged) amplifiers.
  • Steel mesh grille and plastic gasket included.

Specifications:

  • Size: 200 mm
  • Power Handling - Peak: 500 W
  • Power Handling - Continuous: 250 W
  • Impedance: 4 Ohm
  • Magnet Material: HIGH DENSITY FLUX FERRITE
  • Voice Coil Ø: 40 mm
  • Woofer Qes: 0,43
  • Cone Material: WATER REPELLENT PRESSED PAPER
  • Xmax: 8.8 mm
  • Xmech: 16.5 mm

Look out for Bankstown Sound Recommendations

Whether you're shopping in store or online, we're here to guide you with honest, expert advice. Keep an eye out for our 'Bankstown Sound Recommends' callouts across product pages for real insights into the gear we trust and use ourselves, from the Bankstown Sound team.

Related Products

Why Choose Bankstown Sound for Your Car Audio & Tech Upgrades

At our Bankstown Sound store and workshop in Sydney, our team ensures every car and auto audio installation and upgrade starts with an understanding of how you use your car. Our team works with you to understand your driving habits, the features you rely on, and the problems you’re trying to solve.

Most factory setups are built to broad standards and often lack the clarity or seamless connectivity required for how people actually drive. That’s why we focus on modernising your dashboard and audio performance based on how you use your vehicle.